Seagate 7200 hdd sa bad sector repairing

admin

Seagate 7200.7,4,5,8,9,10 hdd sa bad sector repairing . clearing G-list ,smart

Problem in this hdd is cannot make partition.​

• Connect the hdd to console then go to cmd mode and power on. And see the errors
• This hdd is showing master but after some time . in this hdd there are bad sectors in sa . means reading errors .
• Then go to “LOAD MANAGEMENT” and click on “LOAD FROM HDD” button to load hdd details
• Then go to “DEFECT OPERATION” then click on “SWITCH TO ATA MODE” then click on “SURFACE SCAN” to scan the hdd for bad sectors. Seems there are bads.
• Then go to cmd mode and power off and on .
• Before it shows master press CTRL+z to get T> mode.
• Press CTRL+r to load cert .
• !guest!!post_hide_reply_hidden!
  
  
• Then enter “ /1 “ to go to 1> mode , then enter N1 and press enter to clear smart. After done .
• Then power off and on . then go to load management and click on “LOAD FROM HDD” to load hdd details.
• Then go to “DEFECT OPERATION” then power off and on . when it shows ready status . click on “SWITCH TO ATA MODE” button . then click on “ZERO FILL” button . now it shows very busy status. And power is increased to 749.
• After the zero fill complete power off the drives.
  
  

FreeBeacon

Thanks！