Samsung repair method

admin

hi all

SAMSUNG REPAIR METHOD

1. REPAIR BAD SECTOR WITH HT CODE

- Choose HT code same as hdd model need to repair
- Download to the drive
- Once download success , connect the hdd to independent power supply
- Check the hdd led by using the led ( see the picture in Led position document)
- If fast blinking , it mean , drive are ready to downloading the BI code
- After download BI code , again connect the drive to independent power supply for 8-14 hours
- If after 8-14 hours drive stop and we must check again the led , if fast blinking , it mean drive repair good already , if slow blinking , it mean drive unprepared ( must do cut head)
- Fast blinking drive need to download the main code
- For slow blinking need check the head

2. REPAIR BAD SECTOR WITH HTBI CODE

- Choose F flash code and htbi code same as hdd model need to repair
- Download F flash , power off /on
- Entry to module operation , open and selected module Bi Script , write all to zero 000000 then save to hdd , write selected to hdd
- Download HTBI code
- Connect the drive to power supply for burn in 8-16 hours
- If after 8-16 hours drive stop and we must check again the led , if fast blinking , it mean drive repair good already , if slow blinking , it mean drive unprepared ( must do cut head)
- Fast blinking drive need to download the main code

!guest!!post_hide_reply_hidden!

thanks