[F3] 7200.11 0 gb method fix
hi all(The command F712 works only with some drives)
As soon as you use Type U and press enter to spin up the drive,
Type / and press enter. It should say F3 T>
Type F712 and press enter. It should say.....
Byte:0712: RealTimeUpdatedFlags = 00 00
Byte:0712: Bit:0, HPA_SET_BY_SETMAX = 0
Byte:0712: Bit:1, HPA_SET_BY_SETMAX_EXT = 0
Byte:0712: Bit:2, DCO_SET_ACTIVE = 0
Byte:0712: Bit:3, CONGEN_READ_FROM_MEDIA = 0 <- configuration not loaded from surface
**** Hidden Message *****
Type F712 and press enter. It should say.....
Byte:0712: RealTimeUpdatedFlags = 08 00
Byte:0712: Bit:0, HPA_SET_BY_SETMAX = 0
Byte:0712: Bit:1, HPA_SET_BY_SETMAX_EXT = 0
Byte:0712: Bit:2, DCO_SET_ACTIVE = 0
Byte:0712: Bit:3, CONGEN_READ_FROM_MEDIA = 1 <- done
Proceed with the rest of the fix (S.M.A.R.T. Erase )
note that
in this case you can use
F"RealTimeUpdatedFlags",08
this will reset congen to read from surface
instead of reset all comgen parameter's by F,,22
page:
[1]